Vehicles
Sections
12 not categorized PORSCHE CAYMAN PED REINFCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: CAYMAN 2006-08 (includes uncategorized and accessory items)
20606HDFFR The clutch masters fx300 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Rigid disks are designed to be used with aftermarket lightweight flywheels only. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2. General FitmentCAYMAN 2006-08
$1,502.96
Make a selection 20606HD0FR The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Rigid disks are designed to be used with aftermarket lightweight flywheels only. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentCAYMAN 2006-08
$1,502.96
Make a selection TM09 Rennline track mat driver side Porsche 997 05-06 General Fitment911 2005-08911 GT3 2007-11 BOXSTER 2005-08 CAYMAN 2006-08
From $137.50
Make a selection FA500CAYMAN The new fortune auto generation 5 internal floating piston is considerably lighter and uses a low-drag teflon band that drastically reduces stiction. This allows the damper to react quicker to shock forces. The fortune auto 500 series damper shaft seals have 40% less drag than our previous models. This provides for less hysteresis and for superior control of driver inputs. Our new seals are made of a specially formulated buna rubber compound that provides a great balance between reliability and performance! Since the shaft seal is the most important seal on the shock, a stronger seal will greatly improve quality and performance.shims are deflection disks that cover up the port holes on a piston. They regulate t...(choose a part on the right to read more) General FitmentCAYMAN 2006-08
$1,956.15
Make a selection 20606HDFFD The clutch masters fx350 system uses the power plus i pressure plate with a steel back segmented kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the ultimate street enthusiast or weekend racer running a normally aspirated car equipped with cylinder head work and/or hotter cam(s), or with medium-boost turbo or super-charger, or up to 100hp no2. General FitmentCAYMAN 2006-08
$1,502.96
Make a selection TM08B Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. Rennline’s track mats are constructed from lightweight anodized aluminum, weigh less than two pounds, and are stamped with reinforcing ribs for strength. They fit precisely over the contours of Porsche floors and affix with velcro or can be permanently mounted if desired. One of the main benefits of...(choose a part on the right to read more) General FitmentBOXSTER 1997-04911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 CAYMAN 2006-08 BOXSTER 2005-08 911 2005-08 911 GT3 2007-11
$137.50
Make a selection 20606HD0FD The clutch masters fx250 system uses the power plus i pressure plate and a steel backed kevlar disc. Sprung disks can be used with the OEM flywheel or aftermarket lightweight flywheels. This clutch is designed for the street enthusiast or weekend racer. The fx250 offers similar torque holding capacity to the fx100, however, its life expectancy is increased 2-3 times with the kevlar disc. General FitmentCAYMAN 2006-08
$1,502.96
Make a selection TM08 Rennline track mat passenger side Porsche 997 05+ General FitmentBOXSTER 1997-04911 1998-05 911 TURBO/GT2 2001-05 911 GT3 2003-05 CAYMAN 2006-08 BOXSTER 2005-08 911 2005-08 911 GT3 2007-11
From $101.25
Make a selection TM09B Rennline’s track mats give your interior the purposeful look of a racing Porsche and are the perfect solution for protecting your interior from the wear and tear of track driving. The only aluminum floor mat of its kind on the market, rennline’s track mats are inspired by the floor design of factory cup cars to provide drivers a smooth flooring surface that enables the quick footwork demanded of track driving. Rennline’s track mats are constructed from lightweight anodized aluminum, weigh less than two pounds, and are stamped with reinforcing ribs for strength. They fit precisely over the contours of Porsche floors and affix with velcro or can be permanently mounted if desired. One of the main benefits of...(choose a part on the right to read more) General Fitment911 2005-08911 GT3 2007-11 BOXSTER 2005-08 CAYMAN 2006-08
$137.50
Make a selection 10050305503GFK Made in europe by one of the manufacturers to Porsche. Extremely high-quality grp (glass-reinforced plastic) rear bumper that includes every detail for a perfect fit. Features: - produced by an OEM manufacturer. - highest quality standards. - perfect fitment. - lightweight 9.7 lbs. (4.4 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: this only fits in conjunction with widebody / rsr rear fenders, part # FVD503930001 . Please provide us with the year / model. These are high quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must proper...(choose a part on the right to read more)
$1,265.00
Make a selection 071280630 Seat shell consisting of glass fiber reinforced plastic gfk, weight approx. 22 lbs (10,0 kg), shock absorbing foam, special belt slot for hans-systems, belt slot for 4-, 5- or 6- point-belt, head protector, friction grip surface in shoulder and seating area, hans protection, inflammable resisisting cover materials General FitmentALL
From $1,694.94
Make a selection 91135508701EQ Classic Porsche flexible brake hoses can suffer from dry rot and can eventually split and leak fluid, creating a serious safety concern. This line is a high-quality replacement made by brax. It is designed to perform like the original and has the same length and threaded ends. Includes the supporting reinforcement wire like the original. Sold individually. Right or left side fitment. 2 necessary per car.
$22.00
Make a selection 330930103R02 If you are looking to replace a damaged strosek kit or update your car with a strosek kit, we have it. This is made with lightweight gfk / grp (glass fiber komposite / glass reinforced plastic). Sold as a set. 1 needed per car. Please note: this does not include door sills. Ohne turleisten
$726.00
Make a selection 90150115122EQ Steel, prime coated jack receiver reinforcing bracket, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$60.50
Make a selection HEI987002003S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Features: weld-in cage a-pillar hoop with reinforcement bars single door bars with clevis joints for easy removal b-pillar hoop with reinforced integrated x diagonal bar and harness bar v-strut reinforced roof bar c-pillar secured to rear strut towers chromoly steel 1.5" diameter tubing / .098" wall...(choose a part on the right to read more) General FitmentCAYMAN 2009-12CAYMAN 2006-08
From $2,999.86
Make a selection FVD505981SCH Motorsport quality grp (glass-reinforced plastic) front bumper, specifically produced for the early 911 style headlights up to 2001. This will fit all 986 Boxster models however. - produced by a German motorsport manufacturer. - provisions for turn signals are included. - lightweight - made of high strength, grp (glass-reinforced plastic) - includes a sheet of black race mesh for the radiator inlets. Please note: this is a motorsport part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint. They require pre-fitment, filling, sanding, primer and paint...(choose a part on the right to read more)
$1,381.37
Make a selection FVD11GK181GF Motorsport quality grp (glass-reinforced plastic) front bumper bar. Features: - produced by an German motorsport manufacturer. - lightweight 5.7 lbs. (2.6 kg) - made of high strength, grp (glass-reinforced plastic) sold individually. 1 necessary per car. Please note: please provide us with the year / model. These are motorsport quality parts that take time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world. All grp products must properly be fitted and completely prepared prior to paint.
$559.90
Make a selection 96450501800 This support assists in absorbing impacts and supports the bumper reinforcement bars. Sold individually. 2 necessary per vehicle.
From $103.40
Make a selection FVD512991GT3RS Made in Germany by a premier manufacturer of motorsport body work. Extremely high-quality, aero-tested, paintable grp (glass reinforced plastic) deck lid with functional GT3 wing. The decklid has functional, yet subtle ram air spoiler incorporated into the design like the GT3. The ram air spoiler increases the velocity of the air into the intake for added performance. This decklid is also available with a polished carbon wing, part # FVD 512 991 GT3 rsc features: produced by a premier German motorsports manufacturer. Motorsport quality standards. Lightweight. Decklid made of high strength, lightweight grp (glass reinforced plastic). Mounts like factory. Includes: grp deck lid grp wing grp end plates aluminum up...(choose a part on the right to read more)
$5,362.50
Make a selection 07098UU66 The racing shell for the newcomer to motor sports. General FitmentALL
$1,241.90
Make a selection 477831155R02 Lagerspuren
$79.18
Make a selection FVD10504301 These rocker arms allow the valve clearance to be finely adjusted by a set screw. They are manufactured to racing specifications (high rpm load), meaning that they are forged, cnc machined and dlc coated for the ultimate in reliability, which also makes them perfect for street use. - valve clearance is adjustable, which saves time at races and on maintenance. - longer contact surface to work with OEM or high performance camshafts. - work seamlessly under high rpm loads. - forged. - saves weight. - dlc (diamond like carbon) coated which reduces friction and is extremely durable. They will be an indispensable tuning component for your classic!
$4,864.29
Make a selection FVD12399600R Silicone boost hose kit FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's. Facts: tested to withstand over 75 psi (5 bar) boost pressure.fuel and oil resistanttemperature range between - 50 to + 180 degreesbolt on kit over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts. Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.
$590.70
Make a selection HEI516110S Heigo motorsports has been building extremely safe roll cages and roll bars for the Porsche vehicles for 30+ years. They have also produced countless factory and motorsports bars and cages for the marque over the years. We purchase their bars because they have a long-standing history with the fia and dmsb in Germany. They have hundreds of approval certificates to their name and maintain a meticulous safety record. Facts: weld-in cage a-pillar dash bar a-pillar reinforcement dual door protection bars v-brace roof bar x diagonal harness bar included chromoly steel 1.5-inch diameter tubing, .098 wall thickness tubing. Tig welded. Semi-gloss black finish. Delivered with dmsb certificate. Please note: these cages ar...(choose a part on the right to read more)
$3,529.90
Make a selection
© 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |